|
 |
 |
 |
 |
 |
The Audiolab 8000X7 7 Channel Power Amplifier |
DISCONTINUED NO STOCK NOT AVAILABLE SEE AUDIOLAB 8200MB |
  |
  |
The
AUDIOLAB 8000X7 7x100W RMSBipolar
junction transistors chosen for maximum linearity in terms of sustained
current gain at high collector currentsFor
six or five channel operation you can bridge two amplifier channels for
greater power output.7
Pairs of banana plug binding postsSelected
relays with minimal crosstalk between coil and contacts have been usedAn
instantaneous overload protection system monitors the current and
voltage conditionsUses
an advanced loop stabilisation concept called Cascode Compensation |
Optional Products |
  |
  |
| Specifications for the Audio Lab 8000 X7 Power Amplifier | |
| Power Output | 7 x 100W into rated load
impedance (8 Ohm) 5 x 100W and 1 x 150W (8 Ohm) 3 x 100W and 2 x 150W (8 Ohm) |
| IHF tone burst power | 7 x 120W (8 Ohm) |
| Input for rated power | 1.05 Vrms |
| Input impedance | 47 kohm |
| Gain | +28.8 dB at 1 kHz |
| Signal to noise | better than 90 dB (relative to 0 dBW) unweighted |
| Frequency response | 1.5 Hz - 150 kHz ( -3 dB ) |
| Crosstalk Rejection | > 90 dB @ 1 kHz |
| S/N ratio (EFFECT OFF): | left/right: > 102 dB
(A-weighted) all other channels: 90 dB @ 0 dB volume setting |
| Power Source | U.K. AC 230v/50Hz |
| Dimensions | Width: 445mm Height: 130mm Depth: 340mm |
| Weight | ???Kg |