 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
 |
 |
 |
 |
|||||
The Pro-ject RPM 5 |
| ||||
  |
  |
||||
PROJECT RPM5 Supplied with Ortofon 2M Red cartridgeTonearm bearing comprises inverted hardened stainless-steel
points and sapphire thrust-padsConical carbon fibre armtube allows adjustment of needle
azimuth despite fixed headshellVertical tracing angle adjustable MDF platter with cork mat and record clamp Low-tolerance chrome-plated stainless-steel axle runs on a
Teflon bearing plate in a sintered bronze bearing housingMotor decoupled to reduce vibration Central metal block optimises centre of gravityPro-Ject 9c tonearmNominal speeds 33 / 45 / 78 r.p.m. (78 optional)Record clampGold-plated RCA phono socketsRubber-damped aluminium conesPlinth in dark grey piano-lacquer finish |
Optional Products |
||||
  |
  |
||||
|
Specifications for the Project RPM 5 Turntable |
|
| Nominal speeds | 33 / 45 / 78 rpm (78 optional) |
| Dust cover | no |
| Record clamp | yes |
| RCA phono sockets | yes |
| Rubber-damped aluminium cones | yes |
| Tonearm | Pro-Ject 9c |
| Tonearm with fibre armtube and sapphire thrust-pads | yes |
| Effective tonearm length | 9" (230mm) |
| Effective tonearm mass | 9.5g |
| Overhang | 18mm |
| Supplied counterweight | cartridge weight 6 - 10g |
| Optional counterweight | cartridge weight 10 - 15g |
| Downforce range | 10 - 30mN |
| Speed variance | ±0,5 % |
| Wow and flutter | ±0,08 % |
| Signal to noise | -70dB |
| Platter weight/diameter | 1,75kg/300mm |
| Mains power supply | 220 - 240V, 50 cycles or 100 - 110V, 60 cycles |
| Power consumption | 2W |
| Weight | 6,5kg |