|
 |
 |
 |
 |
 |
||
The Pro-ject RPM 9.1 |
DISCONTINUED | ||
  |
  |
||
PROJECT
RPM9.1 Tonearm bearing comprises inverted hardened stainless tips
in ABEC7 spec ballraces Headshell and conical armtube formed from a single carbon
fibre workpiece Armtube allows adjustment of needle azimuth despite fixed
headshell Vertical tracing angle adjustable Acrylic platter with perimeter belt drive and brass record
puck Inverted main bearing with ceramic thrust-pad Central metal block optimises centre of gravity Sorbotane-damped aluminium cones Drive motor housed in separate basePro-Ject 9cc tonearm Nominal speeds 33 / 45 r.p.m Record puck Gold-plated RCA phono sockets Dust cover available as optional extra Plinth in dark grey piano-lacquer finish Pro-Ject spirit level supplied |
Optional Products |
||
  |
  |
||
|
Specifications for the Project RPM 9.1 Turntable |
|
| Nominal speeds | 33 / 45 rpm |
| Dust cover | optional |
| Record weight | yes |
| Motor in separate housing | yes |
| RCA phono sockets | yes |
| Sorbotane-damped aluminium cones | yes |
| Tonearm | Pro-Ject 9cc |
| Tonearm with fibre armtube and sapphire thrust-pads | yes |
| Effective tonearm length | 9" (230mm) |
| Effective tonearm mass | 8.5g |
| Overhang | 18mm |
| Supplied counterweight | cartridge weight 5 - 8g |
| Optional counterweights | cartridge weight 8 - 11g |
| cartridge weight 11 - 15g | |
| Downforce range | 10 - 30mN |
| Speed variance | ±0.5 % |
| Wow and flutter | ±0.06 % |
| Signal to noise | -73dB |
| Platter weight/diameter | 3,5kg/300mm |
| Mains power supply | 220 - 240V, 50 cycles or 100 - 110V, 60 cycles |
| Power consumption | 2W |
| Dimensions (without lid) | Height 180mm Width 440mm Depth 325mm |
| Dimensions optional lid | Height 185mm Width 470mm Depth 355mm |
| Weight | 10.5kg + motor unit 2kg |