 |
 |
 |
|
|
|
 |
 |
|||||||
The
Audiolab 8000S Stereo Amplifier |
|
|||||||
  |
  |
|||||||
The
AUDIOLAB 8000S Remote control Headphone socket Digitally-controlled muting Gold-plated relay contacts Toroidal power transformer 'Straight Line Technology' Gold-plated phono connectors Six line level inputs and three tape loops Class A preamplifier with dual output Proprietary Sorbothane® sonic isolation feet 60 W per channel into rated load impedance (8 Ω),95 W into 4 Ω and 130 W into 2 Ω for short periods Ability to record one input while listening to another Relay-switched independent pre- and power amplifier sections
Duplicated loudspeaker terminals for bi-wired speakers,
multi-room or multi-zone applications
|
Optional Products |
|||||||
  |
  |
|||||||
| Specifications for the Audio Lab 8000 S Stereo Amplifier | |
| Rated output power (both channels driven) | 60 W per channel into rated
load impedance (8 W) 95 W into 4 W and 130 W into 2 W for short periods |
| Typical output power (both channels driven) | 72 W per channel into rated
load impedance (8 W) 115 W into 4 W and 150 W into 2 W for short periods |
| Preamplifier input impedance | 20 kW nominal |
| Preamplifier input level | 175 mV rms (relative to 0.5 V rms preamplifier output) |
| Preamplifier Gain | 9 dB at 1 kHz |
| Preamplifier Signal to Noise | Greater than 80 dB (relative to 0.5 V rms preamplifier output) |
| Preamplifier output impedance | 100ohms nominal |
| Preamplifier maximum output | Greater than 7.76 V rms |
| Record output impedance | 1 kohm nominal |
| Record output gain | 0 db (i.e. the record output level is the same as the input level) |
| Power Amplifier Input impedance | 47 kohms nominal |
| Power Amplifier Input level | 782 mV rms (for full rated output) |
| Power Amplifier Gain | 29.0 dB at 1 kHz |
| Power Amplifier Signal to Noise | Greater than 80 dB (relative to 0 dBW) |
| Frequency response (-3 dB) | 1 Hz - 65 kHz |
| Frequency response (20 Hz - 20 kHz) | ± 0.5 dB |
| Total Harmonic Distortion + Noise | Less than 0.07% |
| Channel separation | Greater than 60 dB at 1 kHz |
| Crosstalk rejection | Greater than 80 dB at 1 kHz |
| Polarity | Non-inverting for all inputs and outputs |
| Headphone output impedance | 330 W (suitable for headphones of 8 W to 2 kohms impedance) |
| Power Supply | 220 - 240 V 50/60Hz |
| Power Consumption | Less than 300 W |
| Dimensions | Wide 445mm Height 75mm Depth 350mm |
| Weight | ???kg |
