 |
 |
 |
|
|
|
 |
|
The NAD C162 Hi-Fi Pre Amplifier |
|
  |
  |
The
NAD C 162 6 Line Level Inputs including 2 Tape In/Outputs with
dubbing facilitySwitchable MM and MC Phono Input2 Line Level Preamp Outputs; one is variable from 2 Line Level Preamp Outputs; one is variable from 0dB to
–12dBGold Plated RCA ConnectorsPure “Class A” Discrete Amplifier ModulesIndependent Headphone AmplifierBass and Treble Control with Tone Defeat Switch“Blue Velvet” Alps motorized volume controlInput switching through hermetically sealed relaysNAD Link12V Trigger OutputNAD SR-5 Full System Remote Control |
Optional Products |
  |
  |
|
Specifications for the NAD C-162 Pre Amplifier |
||
|
Phono Inputs |
||
| Input Impedance (R and C) | MM | F500k ohms + 320pF |
| MC | 100 ohm + 1nF | |
| Input Sensitivity | MM | 2.10mV MC |
| MC | 115microV | |
| Input overload at 20Hz/1kHz/20kHz | MM | 20mV / 230mV / 2V |
| MC | 1.3mV, 12mV, 110mV | |
| S/N Ratio | MM | 80dB ref. 5mV |
| MC | 81dB ref. 0.5mV | |
| Voltage gain | x 28.3 (10.5dB) | |
| (5V rms at Tape out) | <0.03% MM/MC | |
| RIAA response accuracy | ±0.4dB | |
| Line Level Inputs (CD, Video, Tuner, Tape1, Tape2, Aux) | ||
| Input impedance (R and C) | 500k ohms, 320pF | |
| Input sensitivity ref.0.5V | 150mV | |
| Signal/Noise ratio, A weighted ref. 0.5V | >100dB ref. 0.5V | |
| Frequency response, (-3dB 3Hz - 70kHz) | ±0.2dB | |
| Voltage gain (Max Volume) | 10.5dB | |
| THD | <0.01% | |
| Maximum i/p level | 17V | |
| Line Level Outputs | ||
| Output impedance | Pre Out | 75 ohms |
| Tape | Source Z + 1k ohms | |
| Headphones | 100 ohms | |
| Maximum output level | Pre Out | 15V (IHF Load) |
| Tape | 15V (IHF Load) | |
| Headphones | 190mV into 8 ohms | |
| Controls (Volume Setting @ 12:00 position) | ||
| Treble | ±5dB@ 10kHz | |
| Bass | ±5dB@ 50Hz | |
| Physical Specifications | ||
| Dimensions | 435mm Width 80mm Height 285mm Depth |
|
| Weight | 4.8kg | |
