 |
 |
 |
|
|
|
 Now only available in Graphite Black finish |
|
The NAD C272 Hi-Fi Power Amplifier |
|
  |
  |
The
NAD C 272 150W x 2 Continuous Power in to 4 / 8 ohms 220W, 340W, 460W IHF Dynamic Power into 8, 4 and 2 ohms
respectively Bridgeable to 300W mono (8 ohms) Power DriveNAD Soft Clipping12V trigger input for remote Stand-by/On switching Double set of loudspeaker binding posts to facilitate
bi-wiring Impedance Sensing Circuit (ISC) topology All Discrete circuitry All sockets Gold plated Both fixed and variable inputs, switch selectable High current Holmgren Torodial power transformer |
Optional Products |
  |
  |
|
Specifications for the NAD C-272 Power Amplifier |
|
| Power Amplifier Section | |
| Continuous Output Power @ 8 Ohms | 2x150W (21.76 dBW) |
| Rated Distortion (THD 20Hz - 20-kHz) | 0.02% |
| Clipping power (max continuous power/channel) | 180W (22.55dBW) |
| IHF Dynamic headroom at 8 ohms | 3dB |
| IHF Dynamic power (max short term pow./chan.) | 220W (23.42dBW)@ 8 ohms 340W (25.31dBW)@ 4 ohms 460W (26.62dBW)@ 2 ohms |
| Damping factor (ref. 8 ohms, 50Hz) | >150 |
| Frequency response (20Hz - 20kHz) | ±0.3dB |
| Frequency response (3Hz - 70kHz) | -3dB |
| Input impedance R and C | 20kOhms/470pf |
| Input sensitivity (for rated power into 8 ohms) | 1.3V |
| S/N Ratio (ref 1W) | >100dB |
| S/N Ratio (ref rated power) | >120dB |
| Voltage gain | x 28.3 (29dB) |
| Frequency response | 20hz - 20kHz (±3dB) |
| Bridged (Monophonic) Mode | |
| Continuous average power out into 8 ohms | 300W (24.8dBW) |
| IHF Dynamic headroom at 8 ohms | 2.2dB |
| IHF Dynamic power (max short term pow./chan.) | 750W (27dBW)@ 8 ohms 1132W (28.5dBW)@ 4 ohms |
| Physical Specification | |
| Dimensions | Width 435mm Height 132mm Depth 350mm |
| Weight | 11.2kg |
