 |
 |
 |
|
|
|
 |
|
The NAD S200 Silverline Power Amplifier |
DISCONTINUED SEE |
The
NAD S200 Soft ClippingFully balanced XLR inputs2 x 225 Watts continuous power into 8 ohmsLow loss, massive Holmgren toroidal power transformerDynamic Power 280, 470, 700 Watts into 8, 4, and 2 ohmsProtection circuitry senses short circuits, DC and
overheatingDual mono design, Left and Right mirror image amplifier
circuitsBridgeable: 700 W into 8 ohms, 1.2 kW dynamic power into 4
ohms |
Optional Products |
|
Specifications for the NAD S-200 amplifier |
||
| Continuous Output Power 1 | 225W (23.5dBW) | |
| Rated distortion (THD 20Hz-20kHz) | 0.03% | |
| Clipping power (maximum continuous power per channel) | 240W (23.5 dBW) | |
| IHF dynamic headroom at 8 Ohms | 1 dB | |
| IHF dynamic power (Max short term pow./chan.) | 8 ohms | 280W (24.5dBW) |
| 4 ohms | 470W (26.7 dBW) | |
| 2 ohms | 700W (28.4 dBW) | |
| Slew rate | >100 V/µsec | |
| Damping factor (ref 8 ohms 50 Hz) | >200 | |
| Input impendance | 47kOhms / 700pF | |
| Input sensitivity (for rated output into 8 ohms) | 1.4V | |
| Voltage gain | x 28.3 (29dB) | |
| Frequency response, 20Hz-20kHz | 2Hz/100kHz (-3dB) | |
| Signal/noise ratio | ref. 1W | 96dB |
| |
ref. rated power | 120dB |
| THD + SMPTE I.M. + IHF I.M. | <0.03% | |
| Bridged (Monophonic) Mode | ||
| Continuous average power output into 8 ohms 1 | 780W (28.9 dBW) | |
| IHF dynamic headroom at 8 Ohms | 1 dB | |
| IHF dynamic power (Max short term power/channel) | 8 ohms | 940W (29.7 dB) |
| 4 ohms | 1.3kW (31.1 dBW) | |
| Physical Specifications | ||
| Dimensions(WxHxD) | 17.73x7.09x15.56" | 450x180x395mm |
