|
|

| NAD T 744 Connection Table | ||||||||
| AUDIO | VIDEO | |||||||
| Analogue | Digital | |||||||
Line |
Phono |
Optical |
Coaxial |
RF AC-3 |
Component |
S-Video |
Composite |
|
| Inputs | 8 | 0 | 2 | 4 | 0 | 2 | 3 | 6 |
| Looped Outputs |
1 | 1 | 1 | 1 | 1 | 2 | ||
| Monitor Outputs |
0 | 0 | 1 | 1 | ||||
| Zone 2 Outputs |
0 | 0 | ||||||
| Preouts~ 5.1ch Front, Centre, Rear, Rear centres, 2xSub-woofers |
||||||||
| Specifications for the NAD T-744 Receiver | ||
| Amplifier Section | ||
| Power output: Stereo mode (8 ohms with rated distortion) | 2x70W (18.45dBW) | |
| IHF Dynamic power |
2x105W (20.2dBW)@ 8 ohms 2x145W (21.6dBW)@ 4 ohms 2x165W (21dBW)@ 2 ohms |
|
| Simultaneous power output surround mode | 5x50W (16.98dBW) | |
| Total harmonic distortion (at rated power) | 0.08% | |
| IM Distortion (at rated power) | 0.08% | |
| Damping factor (8 ohms) | 60 | |
| Sensitivity and Impedance (R and C) | 200mV / 50k ohms | |
| Frequency response (5 to 20,000Hz) | ±0.8dB | |
| Signal to Noise ratio (ref 60W / 8ohms) | >96dB (IHF A) | |
| Signal to Noise ratio (ref 1W / 8ohms) | >80dB (IHF A) | |
| Tuner Section | ||
| Input sensitivity (Mono) | 16.1dBf | |
| 50dB quieting (Stereo) | 36.1dBf | |
| Total Harmonic distortion (FM Mono) | 0.25% | |
| Total Harmonic distortion (FM Stereo) | 0.5% | |
| Signal to Noise ratio (Mono) | 72dB | |
| Signal to Noise ratio (Stereo) | 66dB | |
| Physical Specification | ||
| Dimensions |
435mm Width 132mm Height 350mm Depth |
|
| Net weight | 16.35kg | |
| Shipping weight | 18.15kg | |
| Remote control | Yes | |