 |
 |
 |
|
|
|
 |
|
The Ortofon Rondo Red MC Cartridge |
|
  |
  |
ORTOFON RONDO RED High quality moving coil cartridgeFrequency range 20Hz - 30kHzWooden bodyIdeal for use with high end turntablesDue to the nature of this product is cannot be
returned under the distance selling directive |
Supporting Products |
  |
  |
|
Specifications for the Ortofon Rondo Red |
|
| Output voltage at 1kHz, 5cm/sec. | 500µV |
| Channel balance at 1 kHz | 2dB |
| Channel separation at 1 kHz | 22dB |
| Channel separation at 15 kHz | 15dB |
| Frequency range | 20Hz - 30kHz |
| Frequency response | 20Hz - 20kHz ±2dB |
|
FIM
distortion at recommended tracking force, DIN 45.542 |
< 1% |
|
Tracking
ability at 315Hz at recommended tracking force |
80µm |
| Compliance, dynamic, lateral | 15µm/mN |
| Stylus type | Nude elliptical Al. cantilever |
| Stylus tip radius | r/R 8/18µm |
| Equivalent stylus tip mass | 0.30mg |
| Tracking force range | 2-2.5g (20-25mN) |
| Tracking force, recommended | 2.3g (23mN) |
| Tracking angle | 20° |
| Internal impedance, DC resistance | 6 Ohm |
| Recommended load impedance | 10-200 Ohm |
| Body material | Grinded wood/Resin com. |
| Colour | Red |
| Weight | 10.5g |
