PRO-JECT DEBUT/PHONO SB << UK >> The Pro-ject Debut/Phono SB Turntable with Ortofon OM 5E Cartridge

The Pro-ject Debut/Phono SB

The Pro-ject Debut/Phono SB
Manual turntable with electro mechanic speed change,
fitted cartridge and integrated MM phono pre-amplifier
Steel platter with felt mat and low-tolerance chrome plated
stainless-steel axle runs on a polished ball bearing
in a brass bearing housing
Motor decoupled to reduce vibration
Tone arm tube is constructed from aluminium
Tone arm bearing comprises inverted hardened stainless-steel points
Equipped with internal phono pre-amp (MM)
Supplied with Ortofon OM 5E cartridge fitted
Available in matt black and silver
The player is ready for use after removing the motor's transport fastener,
fitting the platter and the anti-skating weight,
without further adjustment.

Optional Products

Turntable Accessories

Specifications for the Project Debut/Phono SB Turntable
Dust Cover	Yes
Counterweight	Fitted
Fitted Cartridge	Ortofon OM 5E
Internal Phono pre-amplifier	Yes
Nominal speeds	33, 33/45, 11 rpm and 78 rpm
Speed variance	±0,8 %
Wow and flutter	±0,12 %
Signal to noise	-65dB
Downforce range	10 - 30mN
Effective tonearm length	8,6 " (218,5mm)
Effective tonearm mass	8,5g
Overhang	18,5mm
Platter weight/diameter	1,3kg/280mm
Depth (lid open)	400mm
Height (lid open)	370mm
Dimensions (lid closed)	118 x 415 x 334mm
Weight with lid	6,5kg
Mains power supply	220 - 240V, 50 cycles
Power consumption	6,5W

Technical data phono pre-amplifier
Output voltage	160mV/1kHz at 4mV/1kHz input
Input impedance	47k Ohm/100pF
Noise floor	-88dB
RIAA-equalisation curve accuracy	20Hz - 20kHz / max. 0,5dB