 |
 |
 |
|
|
|
 |
|
The Pro-ject Perspective Turntable |
£ |
  |
  |
PROJECT PERSPECTIVE Sub-chassis decouples platter and tonearm Resonant frequency of the sub-chassis adjustable Tonearm bearing comprises inverted hardened stainless tips
in ABEC7 spec ballracesHeadshell and armtube formed from a single aluminium
workpiece, rotation allows adjustment of needle azimuth despite fixed
headshellVertical tracing angle adjustablePlatter with perimeter belt drive, vinyl playing surface and
record clamp Low-tolerance chrome-plated stainless-steel axle runs on a
Teflon bearing plate in a sintered bronze bearing housingTwo electrically and mechanically optimised motor units for
33,3 and 45 rpm speeds ( 78 motor optional)Pro-Ject 9 tonearmNominal speeds 33 / 45 / 78 rpm (78 optional)Record clampGold-plated RCA phono socketsDust coverTransparent acrylic plinth |
Optional Products |
  |
  |
|
Specifications for the Project Perspective Turntable |
|
| Nominal speeds | 33 / 45 / 78 rpm. (78 optional) |
| Separate motor for | 33 / 45 and 78 rpm (78 optional) |
| Dust cover | yes |
| Sub-chassis | yes |
| Record clamp | yes |
| RCA phono sockets | yes |
| Tonearm | Pro-Ject 9 |
| Tonearm with ABEC7 spec ballraces | yes |
| Effective tonearm length | 9" (230mm) |
| Effective tonearm mass | 11g |
| Overhang | 18mm |
| Supplied counterweights | cartridge weight 3,5 - 7g cartridge weight 8 - 12g |
| Optional counterweight | cartridge weight 6 - 10g |
| Downforce range | 10 - 35mN |
| Speed variance | ±0.5 % |
| Wow and flutter | ±0.08 % |
| Signal to noise | -70dB |
| Platter weight/diameter | 2.6kg/300mm |
| Mains power supply | 220 - 240V, 50 cycles or 100 - 110V, 60 cycles |
| Power consumption | 2W |
| Dimensions (lid open) | Height 420mm Width 460mm Depth 465mm |
| Dimensions (lid closed) | Height 160mm Width 460mm Depth 365mm |
| Weight | 9.4kg |
