 |
 |
 |
|
|
|
 |
|
The
Pro-ject Tube Box II |
|
  |
  |
The
Pro-ject Tube Box Good sound from sound technologyPhono MM/MC selection with switch located at the rear of the
unitSelectable subsonic filterMetal case shields the electronics from vibrational and
electromagnetic interferenceOptimal channel separation through dual-mono circuitryGold plated RCA connection socketsOutboard power supply included |
|
  |
  |
|
Specifications for the Project Tube Box |
|
| Tubes | 2 x ECC83 (12AX 7A) |
| Input impedance, MM | 47k Ohm/120pF |
| Input impedances, MC | 100 Ohm/120pF |
| Output voltage | 300mV/1kHz 3mV/1kHz (MM input) |
| Gain, MM | 40dB |
| Output voltage | 300mV/1kHz 0,3mV/1kHz (MC input) |
| Gain, MC | 60dB |
| Noise floor, MM | 84dB (94dB - A weighted) |
| Noise floor, MC | 67dB (75dB - A weighted) |
| THD, MM | 0.05% |
| THD, MC | 0.08% |
| RIAA-equalisation curve accuracy | 20Hz - 20kHz / max. 0.5dB |
| Subsonic filter | at 18Hz with 18dB/octave |
| Output voltage | 16V/500mA AC |
| Power consumption | 16V/410mA AC |
| Dimension W x D x H | 103 x 141 x 76mm |
| Weight | 810g without power supply |
