 |
 |
 |
|
|
|
 |
|||
The Pro-ject Xperience Comfort |
|
||
  |
  |
||
PROJECT XPERIENCE COMFORT Tonearm bearing comprises inverted hardened stainless-steel
points and sapphire thrust-padsConical carbon fibre armtube allows adjustment of needle
azimuth despite fixed headshell Vertical tracing angle adjustable MDF platter with perimeter belt drive, vinyl playing surface
and record clamp Low-tolerance chrome-plated stainless-steel axle runs on a
Teflon bearing plate in a sintered bronze bearing housing Motor decoupled to reduce vibration Sorbotane-damped aluminium conesSupplied with Tango MC cartridgePro-Ject 9c tonearmNominal speeds 33 / 45 r.p.mRecord clampOpto-electronic end-of-record switch-offGold-plated RCA phono socketsDust coverOlivewood veneer plinth |
Optional Products |
||
  |
  |
|
Specifications for the Project Xperience Comfort Turntable |
|
| Supplied cartridge | MC Tango |
| Nominal speeds | 33 / 45 rpm |
| Electronic speed change | 33 / 45 rpm |
| Automatic cut-off | Opto-electronically controlled |
| Amplifier connection | MM-input |
| Dust cover | yes |
| RCA phono sockets | yes |
| Sorbothane damped aluminium cones | yes |
| Tonearm | Pro-Ject 9c |
| Tonearm with fibre armtube and sapphire thrust-pads | yes |
| Effective tonearm length | 9" (230mm) |
| Effective tonearm mass | 9.5g |
| Overhang | 18mm |
| Supplied counterweight | cartridge weight 6 - 9g |
| Optional counterweight | cartridge weight 4 - 6g |
| Downforce range | 10 - 30mN |
| Speed variance | ±0.5 % |
| Wow and flutter | ±0.08 % |
| Signal to noise | -70dB |
| Platter weight/diameter | 2kg/300mm |
| Mains power supply | 220 - 240V, 50 cycles or 100 - 110V, 60 cycles |
| Power consumption | 10W |
| Dimensions (lid open) | Height 390mm Width 460mm Depth 460mm |
| Dimensions (lid closed) | Height 133mm Width 460mm Depth 360mm |
| Weight | 7.7kg |
