 |
 |
 |
|
|
|
 |
|
||
The Pro-ject Xpression MkII Comfort |
|
||
  |
  |
||
PROJECT
XPRESSION MKII COMFORT Tonearm bearing comprises inverted hardened stainless-steel
points and sapphire thrust-padsConical carbon fibre armtube allows adjustment of needle
azimuth despite fixed headshellVertical tracing angle adjustableCast aluminium platter with felt matLow-tolerance chrome-plated stainless-steel axle runs on a
polished ball bearing in a brass bearing housingMotor decoupled to reduce vibration Rubber-damped aluminium conesPro-Ject 8.6c tonearmSupplied with Ortofon OM10 CartridgeNominal speeds 33 / 45 / 78 rpm (78 optional)Gold-plated RCA phono socketsDust coverAvailable in matt greyAutomatic end-of-side switch offElectronic 33/45 speed change, 78rpm manual |
Optional Products |
||
  |
  |
|
Specifications for the Project Xpression MkII Comfort Turntable |
|
| Nominal speeds | 33 / 45 / 78 rpm (78 optional) |
| Dust cover | yes |
| RCA phono sockets | yes |
| Rubber-damped aluminium cones | yes |
| Tonearm | Pro-Ject 8.6c |
| Tonearm with fibre armtube and sapphire thrust-pads | yes |
| Effective tonearm length | 8.6 " (218.5mm) |
| Effective tonearm mass | 8.7g |
| Overhang | 18.5mm |
| Supplied counterweight | cartridge weight 4 - 6g |
| Optional counterweight | cartridge weight 6 - 9g |
| Downforce range | 10 - 30mN |
| Speed variance | ±0,5 % |
| Wow and flutter | ±0,1 % |
| Signal to noise | -70dB |
| Platter weight/diameter | 2.2kg/300mm |
| Mains power supply | 220 - 240V, 50 cycles or 100 - 110V, 60 cycles |
| Power consumption | 2W |
| Dimensions (lid open) | Height 370mm Width 415mm Depth 400mm |
| Dimensions (lid closed) | Height 118mm Width 415mm Depth 320mm |
| Weight | 6.3kg |
