 |
 |
 |
|
|
|
 |
|||||
The ROKSAN Caspian M Series Integrated Amplifier |
|
||||
  |
  |
||||
 The
ROKSAN CASPIAN M SERIES AMPLIFIERNew
all silver front panel
New
chassis and cover with increased ventilation
High
quality Mains inlet filter
Full
functional System remote control (Silver Colour)
20% higher output power (85 Watts/Channel into 8V,120 W/Ch
into 4V)
Dedicated output protection board with high current relays Five line inputs plus tape input and output
Manual input selector
Motorised volume control with LED position indicator
2 pre-amplifier outputs Power amplifier input (requires internal work for
activation) 350VA ultra low noise, low leakage Toroidal transformer Pre power-up diagnostic check Short circuit protection -20dB mute function Gold plated input RCA connectors and speaker binding posts |
Optional Products |
||||
  |
  |
||||
| Specifications for the ROKSAN CASPIAN M SERIES AMP | |
| Input Impedance | 47kW |
| Input Sensitivity | (70W) Line 240mV |
| Line Inputs | 5 plus Tape |
| Line Outputs | Tape, Preamplifier (x2) |
| Output Voltage | 240mV (Tape Out), 700mV (Pre Out) |
| Power Outputs | Loudspeaker, L & R |
| Output Power | >85 Watts, into 8W, both
channels driven >120 Watts, into 4W , both channels driven |
| Power Supply | 350VA Ultra Low Noise Toroidal
Transformer 4 Regulated Supply Rails |
| Current Output | 50 Amps Peak to Peak |
| Damping Factor | 140 (8W) |
| Frequency response -3dB | <1Hz - 90kHz |
| Gain | 40dB Overall (Pre & Power), 9.3dB Preamplifier, 30.7dB Power Amplifier |
| Harmonic Distortion | 0.002% 1kHz, 0.015% 20kHz 10W
- 8W 0.0025% 1kHz, 0.03% 20kHz 50W - 8W |
| Signal to Noise | Ratio Line 108dBa (ref. 500mV) 85dBa (ref. 1W, 8W) |
| Power Source | 100V - 120V 50Hz / 60Hz 220V - 240V 50Hz / 60Hz (via Mains inlet filter) |
| Power Consumption | < 230 W |
| Dimension | 432 x 330 x 70 (W x D x H) mm 432 x 330 x 80 (including feet) |
| Weight | 12 Kg |
