 |
 |
 |
|
|
|
 |
|||||
The ROKSAN Caspian M Series Power Amplifier |
|
||||
  |
  |
||||
 The
ROKSAN CASPIAN M SERIES POWER AMPLIFIERManual standby function.Auto standby function.Preamplifier input.Chain output for multi-amping.Status display.Short circuit protection. 350VA ultra low noise, low leakage Toroidal transformer.Power supply failure detection.Pre power-up diagnostic check.Gold plated input RCA connectors and speaker output binding
posts. |
Optional Products |
||||
  |
  |
||||
| Specifications for the ROKSAN CASPIAN M SERIES POWER AMP | |
| Inputs Sensitivity | 700mV RMS |
| Power Outputs | Loudspeakers, L & R |
| Power Output | 70W/Ch continuous, into 8 Ohms
(both channels driven) 100W/Ch continuous into 4 ohms (both channels driven) |
| Power Supply | 350VA Toroidal transformer, 4 regulated supply rails |
| Current Output | 50 Amps Peak to Peak |
| Distortion | 0.003%, 1kHz - 8 Ohms 0.005%, 1kHz - 4 Ohms Freq. Response : -3dB, 2.5Hz and 80KHz |
| Damping Factor | 140 (8 Ohms) |
| Gain | 30.7dB |
| Input impedance | 38kOhm |
| S/N Ratio | 116.7dB ref 70W/8 Ohms |
| Power consumption | Standby < 5W Maximum < 230W |
